![]() |
Question BFT Deimos A400 - Printable Version +- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk) +-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1) +--- Forum: BFT Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=7) +--- Thread: Question BFT Deimos A400 (/showthread.php?tid=7220) |
Question BFT Deimos A400 - Makaroni - 15-05-2024 Hi, Hoping someone can assist. I have a Meross Garage Opener which works on my BFT Deimos BT A400 when power is supplied via a power outlet externally. However, when I use terminal 50 and 51 to convert the 24V to 5V for my USB outlet power, the Meross doesn't power up. Terminal 60 & 61 works fine for signal (common) (start), but as soon as I try to plug into my step down converter no power goes to it. Am I doing something wrong? Any advice appreciated. Please see images attached. TIA RE: Question BFT Deimos A400 - dkewley - 17-12-2024 Hi did you ever get this working? I have the same issue. How did you power the meross opener? RE: Question BFT Deimos A400 - OnionBobo - 07-05-2025 (15-05-2024, 08:05 AM)Makaroni Wrote: Hi, Hey I found this thread as I'm having the same issue, purchased pretty much identical converter and not working, instruction manual is unclear. However what I discovered by a volt meter is, its 24V AC !! NOT DC !! OMG ! so you need to buy a 24V AC to 5V 1a or 2amp DC converter, I can't guarantee it works, as I'm returning Amazon DC/DC converter and just ordered a new AC/DC converter from Amazon not arrived yet. I'm not sure if I will remember to report it here but give it a try. Good luck. |