+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: BFT Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=7)
+--- Thread: BFT photocell query (/showthread.php?tid=7202)
BFT photocell query - Adamit - 27-03-2024
Hiya I have a client with a BFT Rigel 5 system
They have photocells after the gate and want the gate to close after they’ve “driven in”
Any ideas how one can achieve this ?
Also can the remotes use a clone 433mhz remote or are they bespoke ?
Thanks very much
Adam
RE: BFT photocell query - Michael - 11-04-2024
(27-03-2024, 04:54 PM)Adamit Wrote: Hiya I have a client with a BFT Rigel 5 system
They have photocells after the gate and want the gate to close after they’ve “driven in”
Any ideas how one can achieve this ?
Also can the remotes use a clone 433mhz remote or are they bespoke ?
Thanks very much
Adam
Hi Aam,
Have you set the Automatic closing? You will need to go into the menu under LOGIC and enter TCA.
Page 18 in the below link.
https://manuals.easygates.co.uk/PDF/misc/bft-rigel-5.pdf
Regards
Easygates Ltd