+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Help and Support Diagrams (https://www.gateguide.co.uk/forumdisplay.php?fid=38)
+--- Thread: Bininca infrared photocell sensor wiring diagram request (/showthread.php?tid=7195)
Bininca infrared photocell sensor wiring diagram request - Hsj - 14-03-2024
We moved into the house recently, so While clearing the ivy from the hedge around the gate pillars I have pulled the wire and now I do not know which wire goes where it has five connection none is marked with + or -
The only thing I know is if I take them as 12345 from left to right no 4 was empty all the rest had wires unfortunately only wires no sleeve was left for me to match
Only I know is the wire colours were Red, Blue gren & white
Will appreciate your help.
Hope I get quick response
RE: Bininca infrared photocell sensor wiring diagram request - JoeF - 22-03-2024
(14-03-2024, 10:19 PM)Hsj Wrote: Hi I wonder if some one can help me and let me know the wiring for the Bininca photocell receiver.iinside it has no as RX 42/20 V1.1,
We moved into the house recently, so While clearing the ivy from the hedge around the gate pillars I have pulled the wire and now I do not know which wire goes where it has five connection none is marked with + or -
The only thing I know is if I take them as 12345 from left to right no 4 was empty all the rest had wires unfortunately only wires no sleeve was left for me to match
Only I know is the wire colours were Red, Blue gren & white
Will appreciate your help.
Hope I get quick response
Hi,
It is hard to say as the cabling is dependent on what colours the installer has used for the connections. i would imagine red would be + and blue the -ve and the green and white the NC/COM.
Joe