+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Nice Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=22)
+--- Thread: Nice MCA1 stuck open after stop command (/showthread.php?tid=7135)
Nice MCA1 stuck open after stop command - Khooke - 23-09-2023
We've unintentionally got our gate stuck open after pressing open a second time on the remote, which from reading online sounds like it sends a stop command. The gate is set to autoclose, but after pressing stop it is now stuck open. How do we reset it or manually send a close command?
On the control panel the open or close buttons are not responding either and Bluebus is flashing red 9 times, which from the manual seems to indicate the automation has been stopped.
Thanks!
RE: Nice MCA1 stuck open after stop command - Michael - 25-09-2023
Hi Khooke,
What accessories do you have wired to the board?
Regards
Easygates Ltd