+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: BFT Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=7)
+--- Thread: Er 10 code on RIGEL 6 control unit (/showthread.php?tid=7055)
Er 10 code on RIGEL 6 control unit - Eddiew - 30-12-2022
Hi, I have dual opening gates using Rigel 6 control unit. The gates have suddenly stopped opening. I have checked the following: Power ok, alternate methods of remote opening which are received at the control unit. Infra red sensors not obstructed and all cables connected. Interior of control unit seems completely dry.
I do see an error code Er 10 in the control unit but the user manual does not reference this error code.
Does anybody have any ideas on what could be causing the problem and how to fix it please?
Thanks
RE: Er 10 code on RIGEL 6 control unit - JoeF - 05-01-2023
(30-12-2022, 04:39 PM)Eddiew Wrote: Hi, I have dual opening gates using Rigel 6 control unit. The gates have suddenly stopped opening. I have checked the following: Power ok, alternate methods of remote opening which are received at the control unit. Infra red sensors not obstructed and all cables connected. Interior of control unit seems completely dry.
I do see an error code Er 10 in the control unit but the user manual does not reference this error code.
Does anybody have any ideas on what could be causing the problem and how to fix it please?
Thanks
Hi,
thanks for the message,
please see the attached list of error codes.
https://www.bftautomationuk.com/technical-support/error-codes-guide.html
Regards Joe