Electric Gates, Garage Door, Access Control, Smart Home & Security Forums
Came - Printable Version

+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: Came (/showthread.php?tid=6997)

Came - Vinnyd - 17-08-2022

Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

RE: Came - SamA - 19-08-2022

(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy to assist.

Sam.

RE: Came - Vinnyd - 19-08-2022

(19-08-2022, 09:29 AM)SamA Wrote:
(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy 
How do I upload pictures on here or am.i a allowed to

RE: Came - Vinnyd - 19-08-2022

(19-08-2022, 09:29 AM)SamA Wrote:
(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy to assist.

Sam.


RE: Came - Vinnyd - 21-08-2022

(19-08-2022, 09:31 PM)Vinnyd Wrote:
(19-08-2022, 09:29 AM)SamA Wrote:
(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy to assist.

Sam.

Hi Sam I tried to upload picture but I can't seem to do it... they are came ati arms. And the control box is a tipo 002za3n 230 volt

RE: Came - JoeF - 03-09-2022

(21-08-2022, 08:11 PM)Vinnyd Wrote:
(19-08-2022, 09:31 PM)Vinnyd Wrote:
(19-08-2022, 09:29 AM)SamA Wrote:
(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy to assist.

Sam.

Hi Sam I tried to upload picture but I can't seem to do it... they are came ati arms. And the control box is a tipo 002za3n 230 volt

Hi,

Please forward images to Info@easygates.co.uk.

kind regards 
Joe

RE: Came - Vinnyd - 03-09-2022

(03-09-2022, 10:18 AM)JoeF Wrote:
(21-08-2022, 08:11 PM)Vinnyd Wrote:
(19-08-2022, 09:31 PM)Vinnyd Wrote:
(19-08-2022, 09:29 AM)SamA Wrote:
(17-08-2022, 06:41 PM)Vinnyd Wrote: Hi all.  I came home this evening and one of my gates wouldn't open so I gave it a little push and it opened fine.  When I closed them one closed fully and the other only 3/4 of the way..  I can hear the clicking  right as it stops..  The capacitor is reading fine on this arm and the mechanical sensors are in the right positions.  Any help greatly appreciated...  System is about 4 years old...

Hi Vinny,

What system are you working on, if you can give me the model of the control board and motor i will be more than happy to assist.

Sam.

Hi Sam I tried to upload picture but I can't seem to do it... they are came ati arms. And the control box is a tipo 002za3n 230 volt

Hi,

Please forward images to Info@easygates.co.uk.

kind regards 
Joe
Thank you Joe I will do.

RE: Came - Michael - 06-09-2022

Thanks.