+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: MHouse Electric Gates (https://www.gateguide.co.uk/forumdisplay.php?fid=48)
+--- Thread: Mhouse WS2 Gates not closing together (/showthread.php?tid=6939)
Mhouse WS2 Gates not closing together - pauln0301 - 08-04-2022
Since storm Eunice battered the gates, they will not close together first time.
They appear to close and then a second or 2 later, they start to open again. If you stop them mid re-opening and close them again, they close on the second attempt but do not sit 100% level together as they used to.
How do I re-synch them so they close together the first time?
Advice and/or web links appreciated.
RE: Mhouse WS2 Gates not closing together - Michael - 13-04-2022
Hi Paul,
1, Press and hold P2 & P3 together until STOP LED goes out (Resetting back to factory default)
2, Press and hold P2 for 3 seconds and release (Learning connected devices, Bus search)
3 When P3 start to flash, press and hold P3 until motor gate starts to move then release (Position search, learning of the opening and closing cycles)
Regards
Easygates Ltd