+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Beninca BOB21m Photo cell issue (/showthread.php?tid=6821)
Beninca BOB21m Photo cell issue - Rossm1987 - 02-05-2021
Hi All,
I have just set up my Beninca BOB21m system, Parameters need to be set Manually in the Brainy control unit. Manual is a bit all over the place but i got there.
The issue i am having is with the Photocells. They have been wired up for Close Protection only but do not function as intended.
Receiver has Power, Transmitter does not- which is logical as it is on a switched terminal see below.
I am fairly sure it must be a Parmeter or a Logic that needs changed but for the life of me i can not figure out what. i tried activating TSt2 and i get an Err 5 alarm . Anyone familiar with these Brainy control units that can offer some assistance. Wiring is correct as per below i have checked it a dozen times. nay pointers would be appreciated
RE: Beninca BOB21m Photo cell issue - Rossm1987 - 02-05-2021
Picture attached now as i wont let me paste it onto the thread