+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Daitem SC100AU 1 controller 2 access points? (/showthread.php?tid=6497)
Daitem SC100AU 1 controller 2 access points? - Window - 07-06-2019
I have added another handset to my existing arrangement of 1 controller and 2 handsets. It has radio linked ok except - the 2 existing handsets are linked to Access 1 [which you would expect], the new one is linked to access 2[?] Why this happened I do not know. With the new handset after operating the gate open command nothing happens [it says Access 1] I can then select Access 2 and it will then open the gate. Pressing the gate command again does not do anything. I have to press the cancel button and operate as above.
Does any body know why this has happened?
I cannot find how to set Access 2 as default on the new handset?
Also the outside temperature is not shown on the new handset.
Any feedback would be appreciated.