CAME ZLJ24 panel - Open gate indicator-light - Printable Version +- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk) +-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1) +--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4) +--- Thread: CAME ZLJ24 panel - Open gate indicator-light (/showthread.php?tid=6160)

CAME ZLJ24 panel - Open gate indicator-light - Domcov - 02-05-2018     Greetings friends! Forgive me if I am posting in the wrong place..!!! I'm new here! I would like more information about this 'open indicator-light'. I checked the installation/programming manual and can only find reference to it as being connected to 11 and 5 on the terminal rail. I tested the voltage at 11 and 5 throughout a few open/close operations but failed to detect any voltage accross 5 and 11 at any stage. I was expecting to pick up 24vac when the gate/s begin to open or are completely open. I have read the programming section but only see reference to the cycle lamp / flasher lamp on 10-E Is the Open gate indicator-light a bit of kit supplied by CAME?? What is its role in the operation of the gate. regards Dom RE: CAME ZLJ24 panel - Open gate indicator-light - Automatic-TC - 02-05-2018 hi did you check dip-switch position ? i got manual frome came zl160 and indicator light output is between 5 and 10 (24v 3W max)  regards