+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Remote Controls and Fobs (https://www.gateguide.co.uk/forumdisplay.php?fid=27)
+--- Forum: Programming and Cloning Help & Instructions (https://www.gateguide.co.uk/forumdisplay.php?fid=28)
+--- Thread: Came 432NA (/showthread.php?tid=5375)
Came 432NA - Stu999 - 04-10-2016
We have 3 remotes Came TOP-432NA and non are working. My electrician thinks they all need re setting or re programming. Does anyone know how this can be done.
I have previously re programmed one from another but how is this done if all 3 are not working ??
RE: Came 432NA - Sav - 17-10-2016
Hi,
Were they previously working? If so it may be a receiver issue rather than a remote. The only way to re program the remotes into the system is to do the following.
1. Re program a master fob to the gate control panel. (Programming depends on the board)
2. Copy the other two remotes from the master. (Can be found in the video below)
http://manuals.easygates.co.uk/copy-came-top432na-remote-controls-video/
Hope this helps.