+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Help and Support Diagrams (https://www.gateguide.co.uk/forumdisplay.php?fid=38)
+---- Forum: Information Requests (https://www.gateguide.co.uk/forumdisplay.php?fid=42)
+---- Thread: Re-wire help needed (/showthread.php?tid=5242)
Re-wire help needed - dicon - 05-11-2015
Looking for some help!
In 2006 I had a single leaf automation system fitted by a company local to Goole
Recently following a fallout with a neighbour the system was ripped out and de-wired by said neighbour without notes for reinstatement. (Deliberate)
I have to relocate control boxes and run all new wiring (using cat5 4 pair)
My requests for help have been ignored by the original supplier/fitter so this is a bit of a last ditch attempt for some clarity as I am really struggling to find the correct info on the web.
The main system is an EB electronics s.r.l model CTR34 running a 12v single ram with 2 pairs of IRW 15 EGS photocell sensors. And a lock. I do have a wiring diagram for this but confused as to how other components link in together.
Externally is a Daitem single dwelling wireless intercom with keypad for pedestrian gate opening. The Daitem control box has wiring diagram for the six colour terminal link (although brown8 was not connected?) 15-16 bridged 17 and 18 not sure what to connect these to?
Internally there is an SRS keypad DC30?
There is an additional control box that I think is part of the Daitem system? Made by Coel (Italy) it has a 24v output with full set of 17 terminals ..... Confused!
I can supply photos by email if anyone can help me out
Thanks
More useful photo .....I hope