+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Hello and help (/showthread.php?tid=5238)
Hello and help - Jimtwitchbrown - 16-10-2015
Hi sorry to jump straight in with a "help" but when needs must and all that.
I have just installed a proteco Q60s to our sliding gate, I have connected all up as per the instructions (opening from left to right) but when I try it the motor goes the wrong way???? I've double checked the wiring of all including the magnetic stops. All has halted at the moment as its gone dark and my head is messed up. Any help would be appreciated.
Jim
RE: Hello and help - Dino - 21-10-2015
Hi, I don't know Proteco's brand but when a motor goes in the wrong way I usually swop the cable (the phases) or if present in your control panel (some brand they have a Logic that can swop the motor direction without touching the wires)
Hope help you. Bye