+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: Proteco Q71A (/showthread.php?tid=4760)
Proteco Q71A - Pike - 31-07-2012
I've just finished installing one of these (came as part of a kit from Gatemotors.co.uk) and it doesnt appear to behave even remotely like the instructions say it should!
Would anybody have an idea how it works, or a link to some information about it, I havent been able to find anything thus far!!
Thanks,
Jeff
RE: Proteco Q71A - Pike - 01-08-2012
I've sussed it out now - it needed 14-15, 16-17, and 18-21 jumped to simulate two pairs of photocells and an emergency stop button.
RE: Proteco Q71A - Proteco_UK - 06-08-2012
Hi
Our website www.gatemotors.co.uk holds the Q71 instruction guide for this.
Please do not continue to run the system without photocells. The obstacle detection that the control board uses is not the primary safety device.
Kind Regards
Gate Motors Technical Support