+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: CAME Automatic Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=4)
+--- Thread: ZBK 1800 came (/showthread.php?tid=4734)
ZBK 1800 came - eduardo - 08-07-2012
hi i have a pair of ZBK came motors controlling a pair of sliding gates.When the master looses power the slave ignores the safety cells and closes the gate leaf on the slave side anyone notice this
RE: ZBK 1800 came - Mark - 10-07-2012
(08-07-2012, 09:33 PM)eduardo Wrote: hi i have a pair of ZBK came motors controlling a pair of sliding gates.When the master looses power the slave ignores the safety cells and closes the gate leaf on the slave side anyone notice this
In A MAster/SLave situation the slave motor is running DUMB just as a motor all the Safety will be present on the MASTER board and if that has gone it will take the Photocells system out of play and leave the slave running without anything. This would not comply with EN Regs as you have no Saftey however the gate is only covering half the openning. I would have a word with CAme Technical see if they have an answer here is there number : 0115 9210430