+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Liftmaster Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=5)
+--- Thread: Liftmaster GOC1A (/showthread.php?tid=366)
Liftmaster GOC1A - BarkerandGeary - 21-06-2011
Picked up a job today with a Liftmaster GOC1A installed that is malfunctioning.
Customer is reporting that he thinks it has bit the dust.
Customer is unspecific of what rams he has connected to it.
I have played about with this install/board before trying to get his photocells working but there seemed to be a fault with the plug in module he had for the cells.
He has been told the Liftmaster GOC1A is obsolete now.
Can someone contact me with a trade price for a replacement board and details if the existing cells will work with the new board.
He has some old keyfobs working with this board on the old abandoned 418mhz frequency. Which he has been told he can use the frequency card and transplant it to a the new board ??
Also anyone gate a manual For the Liftmaster GOC1A panel.
Many thanks in advance
my email is
johnathan@barkerandgeary.co.uk
RE: Liftmaster GOC1A - easygates - 23-06-2011
Hi,
The current liftmaster board is the CB11, Which will require a new radio board, new photocells and new remotes unfortunatly.
Here is a link to the CB11:
http://www.easygates.co.uk/cart/Details.asp?ProductID=180
I have attached the GOC1A Control board instructions.
RE: Liftmaster GOC1A - Arv - 19-03-2013
Sorry to bring up old post
I understand the new receiver card and remotes,
but can i ask why you need new photocells if upgrading from a Goc1a to a CB11?
Cheers.