+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Liftmaster Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=5)
+--- Thread: Problem Setting Limits on CB24 (SCS300-24) (/showthread.php?tid=21)
Problem Setting Limits on CB24 (SCS300-24) - Guest - 18-10-2008
Can anyone help.
I cannot move to the next stage when setting the limits.
CB 24 circuit board.
I have set the open limit and then the close limit and saved it but the light just switches between the two limits and will not go out.
I have tried both sequences open 1, open 2, close 1, close 2 as per the manual and open 1, open 2, close 2, close 1, as per the tech support advise but I cannot move to the next stage to operate both gates with the remote or push button to set the power.
thanks
Andy.
RE: SCS 300-24 - DQuinn - 02-11-2008
I'm having the exact same problem. Has anyone a solution please?
DQuinn
RE: SCS 300-24 - Mark - 03-11-2008
DQuinn Wrote:I'm having the exact same problem. Has anyone a solution please?
DQuinn
This results because the arm is not moving for at least 60% of it travel.
You need to use at least 60% of the motors travel so that they can recognise the limits
RE: SCS 300-24 - DQuinn - 08-11-2008
Thanks, Problem solved.