+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Liftmaster Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=5)
+--- Thread: CB24 / EasyBKA (/showthread.php?tid=153)
CB24 / EasyBKA - cliff finch - 24-03-2010
Can someone please tell me how to connect the EasyBKA to the CB24 control panel. There are 11 wires (2 black, a red, a green, gray, violet, white, yellow, orange, blue and brown) What i'd like to know is what wire i put to what connection on the CB24 control board (i guess several of the wires are surplus)
I only want the EasyBKA to be configured for a four figure pin for friends and family to use to open the gate.
As well as another four figure pin to latch the gates open and then the same pin to close the gate ( as in Easygates reply to Malcolm's enquiry dated 03-04-2009)
Thanks,
Cliff.
RE: CB24 / EasyBKA - easygates - 25-03-2010
Hi,
Attached is a wiring diagram for opening the gates with EASYBKA and also how to latch them open. i will attach quick setup guides for both latching and programming.
Regards
cliff finch Wrote:Can someone please tell me how to connect the EasyBKA to the CB24 control panel. There are 11 wires (2 black, a red, a green, gray, violet, white, yellow, orange, blue and brown) What i'd like to know is what wire i put to what connection on the CB24 control board (i guess several of the wires are surplus)
I only want the EasyBKA to be configured for a four figure pin for friends and family to use to open the gate.
As well as another four figure pin to latch the gates open and then the same pin to close the gate ( as in Easygates reply to Malcolm's enquiry dated 03-04-2009)
Thanks,
Cliff.
RE: CB24 / EasyBKA - cliff finch - 25-03-2010
Easygates,
Thank you for the prompt answers to my questions. I'm sure I'll be able to get the gate opening just as I want now.
Cheers,
Cliff.