+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Garage Door Automation (https://www.gateguide.co.uk/forumdisplay.php?fid=8)
+--- Forum: General Garage Door Opener Support (https://www.gateguide.co.uk/forumdisplay.php?fid=12)
+--- Thread: opener doesnt stay closed or go down on it own. (/showthread.php?tid=129)
opener doesnt stay closed or go down on it own. - Guest is lost - 18-12-2009
Craftsman unit wont stay down and you have to hold the button to make it keep going down and once it hits the bottom of travel, if you dont let off the button just right, the door goes back up and the lights flash on it. It appears the safety devices at the bottom of the garage door are lit up. There is a outside access panel, car remote and inside control at the service door. I am not sure why this unit wont go down and stay there. You have too hold the button inside to get it too go down. it will open with car remote but wont close. It will open and close with the outside access remote. Thank you for the help. em-igottasellit@aol.com
RE: opener doesnt stay closed or go down on it own. - Mark - 18-05-2010
It does sound like a saftey fault which is stopping the garage from working automatically and by holding the button this overides the saftey as this is hold to run mode. You would need to replace the saftey devices then retest the system