+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Automatic Gates - Help and Support (https://www.gateguide.co.uk/forumdisplay.php?fid=20)
+--- Thread: proteco shark Q54 controller (/showthread.php?tid=106)
proteco shark Q54 controller - Guest - 22-10-2009
i am tiring to install this kit which was already half installed by someone else but its the older veriosn of the one used now its goin very wrong one gate opens while at the same time the other closes and vise virsa i cant seem to get them to swing together.
another problem is the photocells there is only one set and they are positioned one the pillars that the gates are one basically at the hinging part they dont do anything.
there is also a vehicel loop relay (LD102 also proteco) which i am asuming will be used in the place of the other photocells but i have no clues as to were it will wire in i was thinking of puting it in as the pedestrian open switch ??? then if thats not enough the guy wants it linked to a door access system that he bought which is a videx telephone exchanged (art. 380? i think)
Basically HELP PLEASE
RE: proteco shark Q54 controller - Proteco_UK - 09-08-2011
Hi
If this post is still valid, please contact us immediately. We can help rectify the system.
Kind Regards
Technical Support
Proteco-UK
01202 744958