+- Electric Gates, Garage Door, Access Control, Smart Home & Security Forums (https://www.gateguide.co.uk)
+-- Forum: Gate Automation and Installation Help (https://www.gateguide.co.uk/forumdisplay.php?fid=1)
+--- Forum: Nice Gate Openers (https://www.gateguide.co.uk/forumdisplay.php?fid=22)
+--- Thread: program a new key pad (/showthread.php?tid=101)
program a new key pad - peter mellor - 14-09-2009
I purchased a new nice Flor-s key pad I have looked on all kinds of pages trying to find out how to program it in. I have had some info when I bought the fob but the info does not tally. M,y gate motor has three buttons open.close.stop/set there is a partly hidden gray button below these can anyone help me to set this new fob
RE: program a new key pad - easygates - 03-03-2011
(14-09-2009, 02:11 PM)peter mellor Wrote: I purchased a new nice Flor-s key pad I have looked on all kinds of pages trying to find out how to program it in. I have had some info when I bought the fob but the info does not tally. M,y gate motor has three buttons open.close.stop/set there is a partly hidden gray button below these can anyone help me to set this new fob
Hi, if possible could you post an image of your control board? You may find there is a Nice plug in reciever on the board with a button on it, if so you need to press the button on the reciever and then press the button on your remote to program.
If you are still having problems, post an image of the control box and i should be able to help more.