My swing gates are stuck at 50% open
|
My swing gates are stuck at 50% open
|
25-03-2024, 12:41 AM
Hi my swing gates won't operate and are stuck at 50% open , I learned the CB11 control board and removed the jumper and pressed the L1 button and the photo cells are just flashing and not a sound or movement from the motors on the gates , can you help and point me in the correct direction to fix this issue thanks Joe
11-04-2024, 08:11 AM
(25-03-2024, 12:41 AM)jctrotting Wrote: Hi my swing gates won't operate and are stuck at 50% open , I learned the CB11 control board and removed the jumper and pressed the L1 button and the photo cells are just flashing and not a sound or movement from the motors on the gates , can you help and point me in the correct direction to fix this issue thanks Joe Hi, Thanks for the email. can you confirm the link is still in the stop terminal and the resistor in the edge terminal. Joe
EasyGates.co.uk - EasyGates Ltd
EasyGates Direct - Trade only accounts. Smart and Secure Center - Smart Home Products |
|
« Next Oldest | Next Newest »
|
| Possibly Related Threads… | |||||
| Thread | Author | Replies | Views | Last Post | |
| Sliding gates are opening/closing like someone is going in /out. | gandreja | 3 | 8,506 |
14-04-2020, 01:45 PM Last Post: RyanB |
|
| Liftmaster CB1 gates started to open themselves | telnet123 | 4 | 25,395 |
01-01-2020, 09:43 AM Last Post: pronosoft |
|
| CB1 How to learn the gates | telnet123 | 1 | 14,939 |
30-04-2018, 01:45 PM Last Post: Tim |
|
| Gates dont close after being held open | jaybee | 1 | 11,865 |
18-06-2013, 09:23 AM Last Post: Blakey111 |
|
| liftmaster CB11 hold gate open problem | sparkey | 5 | 30,385 |
13-05-2013, 08:17 AM Last Post: brucekwilles |
|
| Swing Gate Controller | 0 | 7,986 |
19-07-2009, 06:50 PM Last Post: Guest |
||
