Thread Rating:
  • 96 Vote(s) - 2.85 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Wg20 leaf close sync issues
#1
hello guys,
For some reason when my leaf closes the M2 leaf always closes before the M1 leaf by few seconds so I ended up with a wrongly closed door that gets stuck when trying to open as M1 is blocked by M2 and requires manual intervention to fix!
I did the reset per the manual, device recognition and all but none help!

My question is as follow:
Is there a way I can introduce an extra delay to the M2 leaf while closing so it would give M1 enough time to come in front of it as it’s supposed to?
Thank you Wink
Reply
#2
HI

if you have manual just do reprograming once again . step by step folowing instruction
Best Regards 
Tom 
Automatic-TC
Reply
#3
I did, unfortunately it didn’t help Sad
Is there a way to program the timing of each leaf separately?
Reply
#4
Dear Friends,

I have the same problem with WG 2 one of the leafs reverse for second after the closing cycle. Reprogramming does not solve. we observe motor starts , close up to the limit , then hears the tick sound of the relay, then reverse.
Pls. Advice.
Thanks, Ranjith
RMG Security
Sri Lanka.
Reply
#5
Hello,

If the leafs of your gate are not closing in the correct order, swap the M1 and M2 terminal blocks over. The leaf that is closing last causing the issue will then close first.

If you are experiencing a reverse on one of the leafs this may be that the motor has reached its limits and may be detecting an issue. Try redoing the limit search.
Gate Automation and Access Control from EasyGates Retail Store

EasyGates Trade Store for Trade only

Smart Home Tech from The Smart and Secure Centre

Smart Home News from Smart Home Matters
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Mhouse SL1 won't close correctly Dartman 5 7,372 03-02-2023, 12:04 PM
Last Post: JoeF
  MHouse SL1-10 partial close NAT 5 6,894 30-05-2022, 09:15 AM
Last Post: SamA
  Mhouse WG20 Alex74 1 5,722 04-02-2022, 11:05 AM
Last Post: Michael
  WG20 Factory Reset ? tsmyth@iinet.net.au 1 4,326 28-09-2021, 11:01 AM
Last Post: JamieF
  Problem with wg20 Thanos3d 2 18,705 01-05-2017, 11:22 PM
Last Post: Thanos3d
  MHouse WG20 problem brianjclarke2 1 18,160 01-09-2016, 10:53 AM
Last Post: Sav

Forum Jump:


Users browsing this thread: 1 Guest(s)