Thread Rating:
  • 261 Vote(s) - 3.13 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MHouse WG20 problem
#1
One of the gates was not closing fully, so I tried to re-set - I undid the locking mechanism's which was difficult as they were hard to move. I moved the gates to half way point as it says in the manual 3.5.2 but now nothing happens - P3 light is just flasing constantly. I have turned off electric and tried again but P3 just keeps flashing which it says is because opening mechanism not recognised.
I have tried to do the intial set-up 3.5.1 again but still P3 just keep flashing and there is no response from gates at all - on P3 button or remotes
I had to pull hard to get the gates to move, even after turning the unlock on the arms - could I have pulled gates off the cogs or something?
Advise please as to what I should try???
Reply
#2
Hi,

Firstly we need to check a few parts of the installation.

1. What size motor cable are you using?
2. What is the current status of the stop LED?
3. Is the Bluebus light flashing more than once per second? if yes how many times a second?
Reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Mhouse cl2 error p2 and p3 flashes Ragnarevartov 1 291 20-03-2024, 11:19 AM
Last Post: Aiden Mitton
  Mhouse cl2 ESBus error - gate not operating yeatsie 1 952 30-01-2024, 10:35 AM
Last Post: benbrooks
  Mhouse left gate blocking full open when initialising gates neil.conner 1 1,166 24-08-2023, 01:51 PM
Last Post: Aiden Mitton
  Mhouse SL1 won't close correctly Dartman 5 7,373 03-02-2023, 12:04 PM
Last Post: JoeF
  Mhouse WH2S not opening SamGate 4 3,591 10-10-2022, 09:46 AM
Last Post: Michael
  MHouse SL10 closes, but doesn't open cambo 1 2,992 19-08-2022, 09:29 AM
Last Post: benbrooks
  MHouse SL1-10 partial close NAT 5 6,894 30-05-2022, 09:15 AM
Last Post: SamA
  Mhouse WS2 Gates not closing together pauln0301 1 5,207 13-04-2022, 11:18 AM
Last Post: Michael
  Mhouse WG20 Alex74 1 5,722 04-02-2022, 11:05 AM
Last Post: Michael
  WG20 Factory Reset ? tsmyth@iinet.net.au 1 4,326 28-09-2021, 11:01 AM
Last Post: JamieF

Forum Jump:


Users browsing this thread: 1 Guest(s)