ORNO Video Doorphone -> NICE MC424

[askoba]

Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp

[Automatic-TC]

Hey there,

We have an NICE MC424 control unit and a 2 wing gate. Everything works fine with our remote controls. We know bought a videodoor phone from Orno (2 family pack). The doorphone has a door opener with 2 cables output. The question is where do I need to plug them at the NICE control unit. And also I think the door opener is an electric door opener and I'm not sure if this is "healthy" for the control unit.

many thanks for any help.

regards
Philipp

hi

nice control board has terminal 11-15 for step by step signal from external devices (buttons) . that terminal inputs its only for voltage free signal , before you do any conections make sure that the signal which comes out from 5-6 (video) is voltage free .If isnt thats no problem , you can use 12 vdc relay and send this signal by it .